Amp/Preamp Asylum Looking for a new Amp or Preamp? If you're after tubes, post over here. |
|
I used a Proceed HPA-3 driving a pair of KEF Reference 107/2s and a 102 for LCR, but the 107/2s image so well I removed the 102. Years ago, Madrigal told me Proceed amps are stable even without loads, still I wonder if I should add a 4Ω resister across the center output or reinstall the 102 -- the center is set to off in Oppo 105 menu for surround and the Parasound JC-2 is stereo only. Analog stereo from a JC-3 phono stage, the Oppo 105, and a Sony XA5400ES go through the JC-2.
So the question is: Should I (1) reinstall the inactive 102 center speaker, (2) install a 4Ω resister across the output, or (3) not bother?
db
This post is made possible by the generous support of people like you and our sponsors:
Topic - Unloaded amp channel - dbphd 12:23:52 06/30/14 (5)
- RE: Unloaded amp channel - Caucasian Blackplate 22:58:26 07/03/14 (0)
- RE: Unloaded amp channel - Palustris 13:42:57 06/30/14 (1)
- RE: Unloaded amp channel - dbphd 15:33:56 06/30/14 (0)
- No resistor!!! leave the channel on but not used. - Elizabeth 12:45:58 06/30/14 (1)
- RE: No resistor!!! leave the channel on but not used. - pictureguy 23:07:26 07/03/14 (0)