71.67.188.239
'); } else { document.writeln(''); } } else { document.writeln(''); } } else { document.writeln(''); } } // End --> |
This Post Has Been Edited by the Author
In Reply to: RE: Yep. I have IIIA's. I recommend bi-amping as well. posted by Swamis Cat on February 26, 2016 at 08:47:41
If you buy a used 2 way or single filter Marchand XO you can get the proper plug in boards from Phil with the needed slopes/freq. You just take out the old ones and plug in the new. The boards are cheap enough. The performance is very good.
Marchand has a cheaper XM-9 XO that might fit your budget, at least used.
The old commercial 3rd order XOs are not that expensive. There is a cheap current production DOD piece you can try out at $100 or less.
The Ashly stereo 2 way stereo XR22/18 should cost under $300 in good operating condition. A pair of mono XR20/18 at or just about $300.
The Crown VFX2 goes for $200-300 on ebay.
There are quite a few of these on craigslist but it takes an effort to gt a local to send it to you and not likely you find one locally unless you are in LA Chicago or NYC metro areas..
Follow Ups: