In Reply to: well that was interesting. .. posted by watts on January 15, 2017 at 14:03:49:
Did you yank on the wires into the solder joints to figure out if any of them are cold soldered? The intermittent connection is likely to be an intermittent break due to a cold solder or other mechanical problem with the wires at a crossover junction since both mid and tweeter come off. The response to mechanical knocks is pretty much definitive - that is the kind of problem you should be looking for. . .
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: well that was interesting. .. - Satie 16:56:19 01/15/17 (7)
- RE: well that was interesting. .. - watts 17:56:32 01/15/17 (6)
- RE: well that didn't take long! - watts 19:44:13 01/15/17 (5)
- I have my tweets in (3.6) at same tweet position as if tweets out. - 3+4=5 11:39:50 01/16/17 (0)
- RE: well that didn't take long! - Satie 22:33:22 01/15/17 (3)
- RE: well that didn't take long! - watts 16:31:08 01/16/17 (2)
- RE: well that didn't take long! - Satie 11:19:04 01/17/17 (1)
- RE: well that didn't take long! - watts 20:02:13 01/17/17 (0)