|
Planar Speaker Asylum Welcome! Need support, you got it. Or share your ideas and experiences. |
|
|
|
Planar Speaker Asylum Welcome! Need support, you got it. Or share your ideas and experiences. |
|
In Reply to: RE: Sub option for MG .7 Rythmik F12 or TBI Audio posted by BDP24 on October 21, 2016 at 00:01:41:
Sub is connected via Neutrik Speakon connector high level input and crossover set to approx 50 hz.
Info taken from Rel manual:
"The high-level input is designed to accept the stereo (two-channel) signals from the speaker terminals of your receiver, integrated amplifier or basic amplifer. This has the advantage of ensuring that your subwoofer receives exactly the same signal as the main speakers, which means that the character of the bass from the main system is carried forward into the Sub-Bass System.
This is a very important point and together with REL's Natural RollO TM circuitry, ensures far superior system integration of the Sub-Bass System with the main system."
No published info on slope.
Dialing in Rel subs are a combination of placement, crossover and volume settings, and as you know are room dependent. The 2nd sub required lowering the crossover from 65Hz to 50Hz and extended the frequency from 31.5Hz to 25 Hz.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: Sub option for MG .7 Rythmik F12 or TBI Audio - larryk1 06:21:19 10/21/16 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2024, Audio Asylum, all rights reserved ]
