In Reply to: RE: 800 W/ch for maggie 20.1 posted by neolith on August 29, 2016 at 06:42:12:
Hi Neo,
"Noise" from a miniDSP can be either:
#1: hiss from the speakers ... like 'tube rush', say.
#2. or you get an almighty thump through the speakers if you turn it on or off ... and your power amps are on.
I certainly have absolutely none of #1. In fact, I find it hard to make out any degradation from my vinyl now going through a digital device.
I also don't get #2 with my miniDSP 10x10Hd - although earlier miniDSP 2x4 units were notorious for making a thump when they were turned on or off - so you had to be careful to switch off your power amps first. (They have now fixed this problem.)
Regards,
Andy
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: miniDSP "noisy"? - andyr 15:34:01 08/29/16 (0)