In Reply to: RE: MGIII active crossover? posted by Skeepowder on August 5, 2016 at 15:00:18:
You can also triamp if you have extra amplification channels already. Another forum member and I did lots of experimentation on moving the mid/tweeter XO to first order on the 3a and the 3.3. Most of it offline. Also Neo has worked out how to copy the stock slopes into line level passive once you have moved out the tough portion - which is the 3rd order low pass for the bass to mid/tweeter. That portion has to be active XO.
As I pointed out before, you can biamp using the XM9 with a 3rd order board to do the bass LP with magnepan's recommendation and use a passive high pass (just a capacitor in series with your mid/tweet amp's input) for the midtweeter.
'
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: MGIII active crossover? - Satie 04:09:25 08/06/16 (14)
- RE: MGIII active crossover? - Skeepowder 16:41:36 08/06/16 (13)
- RE: MGIII active crossover? - Satie 04:41:26 08/08/16 (12)
- RE: MGIII active crossover? - Skeepowder 09:26:42 08/08/16 (11)
- RE: MGIII active crossover? - Satie 09:32:46 08/08/16 (10)
- RE: MGIII active crossover? - Skeepowder 19:04:50 08/08/16 (9)
- RE: MGIII active crossover? - Satie 22:00:51 08/08/16 (1)
- RE: MGIII active crossover? - BDP24 01:09:10 08/09/16 (0)
- RE: That link to the XOs ... - andyr 20:35:11 08/08/16 (6)
- RE: That link to the XOs ... - Skeepowder 08:33:08 08/09/16 (5)
- RE: That link to the XOs ... - Skeepowder 08:55:21 08/11/16 (4)
- RE: That link to the XOs ... - Satie 16:09:13 08/12/16 (3)
- RE: That link to the XOs ... - Skeepowder 16:59:17 08/12/16 (2)
- RE: That link to the XOs ... - Satie 06:46:56 08/13/16 (1)
- RE: That link to the XOs ... - Skeepowder 08:19:12 08/13/16 (0)