In Reply to: Old glue formulation or newer formulation posted by Carl G on April 13, 2016 at 21:18:38:
>>>you need about the same power to drive a mid/tweeter as is used for the bass panels<<<<
I probably wasn't paying attention when this was brought up in the past but I'd like to revisit this concept. I've got a pair of Emotiva XPA-1 mono blocks on each bass panel (high current, 1000 watts @ 4ohm), no way would I even consider my mids/tweeters getting pumped with those. I use a pair of UPA-1s which are about 400w ea @ 4ohm.
The reason I mention this is I just had a discussion with M3 Lover the other day regarding a pair of Parasound JC1s on the top end of my 20s and we both felt it would be a bit of an overkill. Although it would be possible to reduce the gain on my Marchand XO, I figure that would defeat the purpose.
Just my opine, YMMV.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: Old glue formulation or newer formulation - Green Lantern 05:34:38 04/14/16 (4)
- RE: Old glue formulation or newer formulation - pictureguy 10:13:12 04/14/16 (0)
- RE: Old glue formulation or newer formulation - Roger Gustavsson 06:43:15 04/14/16 (2)
- RE: Old glue formulation or newer formulation - Norman M 07:37:51 04/14/16 (1)
- RE: Old glue formulation or newer formulation - Roger Gustavsson 09:49:07 04/14/16 (0)