In Reply to: RE: So the mid-range fuse didn't save it? nt posted by macmagman on April 13, 2016 at 20:15:28:
a few years ago, i had to sent my 3.6s in for a complete rebuild of the mid/woofers. the older bonding agent for wires to mylar are more prone to delaminating (and the effect of moisture) compared to the newer "glue". You may to give them a call to find out when they switched to the newer material. The assumption is that if you do need to sent it in, your repaired 20.1's will last many years . On the other hand, if you are driving your maggies hard, are you sure that your upper Sanders amp NEVER is driven to its max. From multiple Asylum discussions, you need about the same power to drive a mid/tweeter as is used for the bass panels....just sayin....
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Old glue formulation or newer formulation - Carl G 21:18:38 04/13/16 (18)
- RE: Old glue formulation or newer formulation - Green Lantern 05:34:38 04/14/16 (4)
- RE: Old glue formulation or newer formulation - pictureguy 10:13:12 04/14/16 (0)
- RE: Old glue formulation or newer formulation - Roger Gustavsson 06:43:15 04/14/16 (2)
- RE: Old glue formulation or newer formulation - Norman M 07:37:51 04/14/16 (1)
- RE: Old glue formulation or newer formulation - Roger Gustavsson 09:49:07 04/14/16 (0)
- RE: Old glue formulation or newer formulation - macmagman 22:38:26 04/13/16 (12)
- RE: Old glue formulation or newer formulation - Roger Gustavsson 22:56:53 04/13/16 (11)
- RE: Old glue formulation or newer formulation - macmagman 23:14:03 04/13/16 (10)
- Low crossover and thinner mylar and foil - Satie 14:50:08 04/14/16 (9)
- RE: Low crossover and thinner mylar and foil - macmagman 15:58:53 04/14/16 (8)
- RE: Low crossover and thinner mylar and foil - Satie 20:51:05 04/14/16 (7)
- RE: Low crossover and thinner mylar and foil - macmagman 21:39:09 04/14/16 (6)
- RE: Low crossover and thinner mylar and foil - Satie 11:08:33 04/15/16 (5)
- RE: Low crossover and thinner mylar and foil - Green Lantern 08:36:35 04/17/16 (1)
- RE: Low crossover and thinner mylar and foil - Satie 10:27:45 04/17/16 (0)
- Marchand Mods of xover cards - Carl G 06:33:46 04/16/16 (2)
- RE: Marchand Mods of xover cards sonic improvements - Satie 15:24:15 04/16/16 (0)
- RE: Marchand Mods of xover cards - Satie 13:35:04 04/16/16 (0)