In Reply to: RE: Seeking advice on effective wall diffusion? posted by grantv on April 6, 2016 at 06:59:25:
Something like what you've done was another option I was thinking of - but it would be much more labour intensive.When you say "I think 1" wide and 1" apart is too little to make any appreciable difference." - are you thinking that I meant just having 2x bamboo rods behind each speaker?
What I meant was ... an array of bamboo rods taking up the space between the panels, on the sloping wall. If they were 1" in diam and 1" apart, that would be about 37 poles (extending a total of 6' and going from the benchtop to the height of the panels - so about 4' long).
And what did you mean by "P.S. I would cut the back side at the wall angle so the protrusions are level with the floor."? I can't picture it!
Regards,Andy
Edits: 04/06/16
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: Yeah that's brilliant, Grant ... - andyr 15:34:49 04/06/16 (7)
- RE: Yeah that's brilliant, Grant ... - grantv 19:00:21 04/06/16 (6)
- RE: Certainly could be, Grant ... - andyr 04:18:16 04/07/16 (3)
- 3" or more (if possible) away would be much better! - grantv 06:49:26 04/07/16 (2)
- RE: 3" or more (if possible) away would be much better! - pictureguy 10:59:21 04/30/16 (0)
- P.S. - grantv 07:43:09 04/07/16 (0)
- RE: Yeah that's brilliant, Grant ... - rosendds@frontiernet.net 03:56:30 04/07/16 (1)
- RE: Yeah that's brilliant, Grant ... - grantv 06:52:37 04/07/16 (0)