|
Planar Speaker Asylum Welcome! Need support, you got it. Or share your ideas and experiences. |
|
|
|
Planar Speaker Asylum Welcome! Need support, you got it. Or share your ideas and experiences. |
|
In Reply to: mmg fuse bypass posted by DTS ma 7.2 on April 4, 2016 at 11:56:00:
Unscrew the nuts on the right (as viewed) and remove the wire going to the fuse from the upper one, red, then move the brown wire to that position (assuming you don't want a resistor in line with your tweeter) and replace the nuts (for now, you can screw the wire going to the fuse with the other one going to the fuse - nothing has to be cut).
Edits: 04/04/16 04/04/16
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- brown to red - wazoo 13:36:56 04/04/16 (5)
- RE: brown to red - DTS ma 7.2 15:03:36 04/04/16 (4)
- RE: brown to red - wazoo 17:43:08 04/04/16 (3)
- RE: brown to red - DTS ma 7.2 18:02:02 04/04/16 (2)
- no, read Davey's post - wazoo 18:18:15 04/04/16 (1)
- RE: no, read Davey's post - DTS ma 7.2 06:23:53 04/14/16 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2024, Audio Asylum, all rights reserved ]
