|
Planar Speaker Asylum Welcome! Need support, you got it. Or share your ideas and experiences. |
|
|
|
Planar Speaker Asylum Welcome! Need support, you got it. Or share your ideas and experiences. |
|
In Reply to: RE: Maybe a solution posted by neolith on January 23, 2016 at 08:20:09:
The blue wire should have been going to where the brown wire is, not to the inductor, and the brown wire should have gone to the capacitor. The tweeter and woofer are wired in inverse polarity and the person who modded that crossover probably tried to put them in the same polarity (which would have been correct with the tweeter set at 350 hz).
To correct things - lose the 100 uF cap, replace the inductor, connect the blue wire to the input post (where the red wire connects) and move the brown wire to the bottom of the 12 uF cap.
"Our head is round in order to allow our thoughts to change direction." Francis Picabia
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Wiring errors - neolith 08:39:51 01/23/16 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2024, Audio Asylum, all rights reserved ]
