In Reply to: mg1.6 xo suggestions posted by tripwr1964@yahoo.com on January 18, 2016 at 08:58:07:
I would tie the caps together with cable ties and then pot the caps and coil to the "floor" with silicon. Personally, I would lose the banana plugs and bare wire the cables to the posts (one less connection) and about every 3-6 months or so clean the connections with DeOxit. Some would also fill the box with sand to dampen any movement but I find that to be a mess. As far as connectors, wire nuts work just fine and again you can clean the connections a couple times a year if you are up to it.
BTW, I would swap the position of the input posts because most of the equipment I have do it that way. Obviously it doesn't really matter but I like consistency.
"Our head is round in order to allow our thoughts to change direction." Francis Picabia
Edits: 01/19/16 01/20/16
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Suggestions - neolith 06:36:29 01/19/16 (1)
- RE: Suggestions - tripwr1964@yahoo.com 16:09:19 01/19/16 (0)