In Reply to: MG 1 Capacitors posted by gwestwood on October 17, 2015 at 18:23:02:
No advice on a particular brand. Some comments: 1)The voltage rating is not too important as long as it is 50V or higher 2) exactly matching to 14 mfd is not needed so a 12 mfd + 2.2 mfd (sometimes easier to find) is okay as long as both speakers are the same, 3) different combinations such as (12 + 2) or (10 + 3.9) are ok as well. Finally your replacement caps may be considerably larger (physically) than stock so a neat fit may be a problem. My suggestion is to either do not look at the back of the speaker or close your eyes when you listen :).
"Our head is round in order to allow our thoughts to change direction." Francis Picabia
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: MG 1 Capacitors - neolith 06:10:55 10/18/15 (1)
- RE: MG 1 Capacitors - pictureguy 21:37:18 10/13/15 (0)