In Reply to: RE: Active crossover for ET-LFE8b posted by Davey on October 12, 2015 at 07:11:35:
Actually for the schematic to work the woofer and tweeter have to be inverted relative to the mid. On the schematic, the woofer is shown inverted (look carefully at the markings on the speaker pins) but not the tweeter. I did the necessary inversions to get a proper Bode. Whether the tweeter and woofer are normal with an inverted mid or the reverse situation is immaterial to my ears but some may claim they can here a difference (absolute polarity nuts).
"Our head is round in order to allow our thoughts to change direction." Francis Picabia
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: Active crossover for ET-LFE8b - neolith 09:18:10 10/12/15 (5)
- RE: Active crossover for ET-LFE8b - Davey 10:01:31 10/12/15 (1)
- RE: Active crossover for ET-LFE8b - Davey 16:10:55 10/18/15 (0)
- RE: Active crossover for ET-LFE8b - josh358 09:41:55 10/12/15 (2)
- RE: Active crossover for ET-LFE8b - Davey 10:18:27 10/12/15 (1)
- RE: Active crossover for ET-LFE8b - josh358 11:15:01 10/12/15 (0)