In Reply to: Try this calculator, maybe. posted by MWE on June 24, 2015 at 14:29:22:
I'm sorry if I wasn't clear.
The crossover I'm interested in is a LINE LEVEL meant to go between the PREAMP and a PAIR of amps for each speaker. The speaker crossover is to be DELETED and either saved for eventual resale OR parted out.
Such passive line level crossovers are sensitive and designed around the INPUT impedance of the amp and the OUTPUT impedance of the preamp.
Such a crossover as I imagine, should be easily fabricated on a circuit board which will fit inside an Altoid tin. One for EACH side, since I've gone to 3' speaker cables.
Too much is never enough
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: Try this calculator, maybe. - pictureguy 16:15:14 06/24/15 (7)
- Maybe need to clarify - MWE 17:04:32 06/24/15 (6)
- RE: Maybe need to clarify - pictureguy 19:19:58 06/24/15 (5)
- RE: Maybe need to clarify - Satie 08:31:00 06/25/15 (4)
- RE: Maybe need to clarify - pictureguy 09:08:58 06/25/15 (3)
- RE: Maybe need to clarify - Satie 09:29:49 06/25/15 (2)
- RE: Maybe need to clarify - pictureguy 12:33:06 06/25/15 (1)
- RE: Maybe need to clarify - Satie 12:41:29 06/25/15 (0)