Planar Speaker Asylum Welcome! Need support, you got it. Or share your ideas and experiences.

---

[ Follow Ups ] [ Post Followup ] Thread: [ Display  All  Email ] [ Planar Speaker Asylum ]

---

[ Alert Moderator ]

---

RE: Placement of Tympani's for HT

Posted by Roger Gustavsson (A) on June 24, 2015 at 08:29:26

In Reply to: RE: Placement of Tympani's for HT posted by RPM-MACHINE on June 24, 2015 at 05:39:46:

Hi Reenesh,

For the information, there are no midrange drivers in the ID. There are a tweeter and two bass drivers, both operating up to 1.1 kHz. One of the bass drivers, a low bass driver without tuning buttons, the other with tuning buttons and a dividing strip is differently tuned. The IIIB has a "real" midrange driver. I have "slaughtered" a pair of Tympani tweeters. Originally they are 8 inch wide, can easily be cut down to 100 mm. I placed them right next the midrange drivers of my IIIA. Really bettered the imaging! Still, they are certainly not top notch. Took them apart and wanted to reuse their magnets in a different shaped tweeter, longer and narrower. Thinner Mylar and foil conductors too. Never had the time to finish that project... Still have the IIIA in storage in my garage.

This post is made possible by the generous support of people like you and our sponsors:

Sonic Craft

---

[ Top of Page ] [ Contact Us ] [ Support/Wish List ] [ Copyright © 2024, Audio Asylum, all rights reserved ]

---

[ General ] [ Speakers ] [ Tubes ] [ Vinyl ] [ Digital ] [ Hi-Rez ] [ Video Asylum ] [ Cables ] [ Tweaks/DIY ] [ Music ] [ Films ]

---