Thanks j beede ...

Planar Speaker Asylum

Welcome! Need support, you got it. Or share your ideas and experiences.

Thanks j beede ...

Posted by andyr (M) on May 19, 2015 at 19:06:09

In Reply to: RE: Get a taller chair :) nt posted by j beede on May 19, 2015 at 18:36:26:

...why not replace all the wire while the speakers are apart? From your posting I got the impression that only the dead panels were being sent out. Maybe I misread that.

You read correctly - the first thought was to just send off the dead panels. But I am seeing my mate on Sunday, so will ask him whether he wants to send them all off - rather than 2 now ... and the other 2 in 'X' years time, when they inevitably fail.

There are 2 advantages with proceeding with the current plan, though:

1. he still gets to listen to some great speakers while he waits for 2 failed panels to come back from the refurb. :-))

2. 2 bass panels fit inside the ply 'coffins' that I made for my own Frankenpan bass panels (for shipping protection) - 4 bass panels won't.

My T-1C and all the T-1D I recall had "L" bracket feet that facilitated any alignment of the panels.

These panels have some chrome 'mushrooms' (about 1"D) nailed to their bases - not the usual T-feet. They were removed when the burlap socks were stripped off - and won't be needed with the braced stands.

Regards,

Andy

This post is made possible by the generous support of people like you and our sponsors:

Follow Ups Full Thread

Topic - Newly purchased T1-Ds playing ... sort of!! ... - andyr 20:50:39 05/18/15 (14)

RE: Newly purchased T1-Ds playing ... sort of!! ... an update! ... - andyr 19:48:33 08/04/15 (6)

RE: Newly purchased T1-Ds playing ... sort of!! ... an update! ... - Satie 09:30:24 08/06/15 (1)

True ... - andyr 13:02:01 08/06/15 (0)

RE: Newly purchased T1-Ds playing ... sort of!! ... an update! ... - Roger Gustavsson 23:13:43 08/05/15 (3)

RE: Maybe the importer ment the midrange wire of the 3-series where AWG 31 and 32 as been used? ... - andyr 02:45:47 08/06/15 (2)

RE: Maybe the importer ment the midrange wire of the 3-series where AWG 31 and 32 as been used? ... - Roger Gustavsson 04:40:59 08/06/15 (1)

RE: Maybe the importer ment the midrange wire of the 3-series where AWG 31 and 32 as been used? ... - andyr 05:16:23 08/06/15 (0)

Get a taller chair :) nt - neolith 11:00:21 05/19/15 (3)

Do that - Satie 20:55:02 05/19/15 (0)

RE: Get a taller chair :) nt - j beede 18:36:26 05/19/15 (1)

Thanks j beede ... - andyr 19:06:09 05/19/15 (0)

RE: Newly purchased T1-Ds playing ... sort of!! ... - Satie 21:33:03 05/18/15 (2)

Thanks, Satie. nt - andyr 21:35:57 05/18/15 (1)

RE: Thanks, Satie. nt - Roger Gustavsson 23:33:01 05/18/15 (0)

Follow Ups

Thanks j beede ... - andyr 19:06:09 05/19/15 (0)

Post a Message!