In Reply to: RE: Your clarification on the minidsp 2x4 units ... posted by andyr on April 16, 2015 at 16:09:29:
At the time of my investigations, minidsp had a board called the minidigi that you could add to the minidsp 2x4 to add SPDIF outputs and then use your own DAC. The other 2x8 and 2x10 boards were not available.
I actually purchased a pair of miniDIGI boards and tried them with some DAC's I had on hand. I ended up abandoning this approach because in my setup the minidsp 2x4 did not seem to cleanly reset the minidigi board on power up and power down. Sometimes leaving me in a state with no sound and sometimes with static and sometimes with pop's to my amps on power down. I know that I could have gone to a power up/down sequencer to help out the situation. But at the time I did not want to add that complication to my system.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: Your clarification on the minidsp 2x4 units ... - dumpingground 18:54:23 04/16/15 (1)
- Aah, thanks. nt - andyr 19:11:32 04/16/15 (0)