|
Planar Speaker Asylum Welcome! Need support, you got it. Or share your ideas and experiences. |
|
|
|
Planar Speaker Asylum Welcome! Need support, you got it. Or share your ideas and experiences. |
|
In Reply to: RE: Final resolution of the Maggie Question posted by wbeau@yahoo.com on December 16, 2014 at 18:56:57:
The Dyna III can do your top if you biamp (I have one too), but if you triamp you will need either a resistor or a spelz autoformer in order to drive the tweeter alone. It should be able to drive the midrange alone.
The Quad 909 should do well for the bass panel.
The CJ preamp is probably a good choice for the top, and the Dyna PAS 2 should get updated thoroughly either by Tutay or another experienced modster. Van Alstyne has an update kit for the PAS 2 if you want to DIY.
I would put the black widow on the Micro table and the AT24 on the arm assuming you have a line contact stylus on the AT24. You can get a an SAS stylus from Jico in Japan for The V15 if you don't have an intact stylus. It is a very good cartridge, and you can bypass the phono input and output connectors on the PAS2 and hard wire them to your interconnects if your PAS 2 is in working order. The old connectors fuzz things up.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: Final resolution of the Maggie Question - Satie 20:49:48 12/16/14 (4)
- Inventory - wbeau@yahoo.com 14:34:26 12/17/14 (3)
- RE: Inventory - Satie 08:28:50 12/18/14 (1)
- RE: Inventory - pictureguy 00:42:32 12/19/14 (0)
- RE: Inventory - mondial 15:12:06 12/17/14 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2024, Audio Asylum, all rights reserved ]
