In Reply to: RE: Magnepan 12QR crossover question posted by JBen on August 29, 2014 at 15:54:32:
JBen,
Thanks for input - i will wait for your next post...
Here are my new parts for little crossover project :
2x Jantzen wire air coil 2.8mH, 0.443 ohm
2 x Mundorf Mcap EVO Oil kondensator 0,10 uf (shunt for tweeter)
10 x Mundorf Ecap 70 VDC PLAIN 10,00 uF (5x10uF per side electrolyts for bass)
2 x Mundorf Mcap 33,00 uF
2 x Mundorf Mcap 630 0,10 uF (shunt for bass)
Wile choosing above i kept in mind to use original MG 12 crossover space - i want to keep them as close as possible to stock units - so, no external crossover.
I think, that biggest improvement will come from air coil in bass and Mundorf Mcap shunted with Mundorf Evo Oil in tweeter section....
I like Mundorfs for the sound and i hope that this combination will do the job in Maggies.
Because i was not sure about bass caps (if they can influence the sound in such place of crossover) i decided to stay with elcos and upgrade only their quality - so once again good old Mundorfs..
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: Magnepan 12QR crossover question - krakus248@gmail.com 22:47:24 08/29/14 (5)
- RE: Magnepan 12QR crossover question - Satie 13:28:12 08/30/14 (3)
- RE: Magnepan 12QR crossover question - krakus248@gmail.com 00:29:13 08/31/14 (2)
- RE: Magnepan 12QR crossover question - Satie 11:39:47 08/31/14 (0)
- RE: Magnepan 12QR crossover question - JBen 08:29:18 08/31/14 (0)
- RE: Magnepan 12QR crossover question - JBen 00:35:27 08/30/14 (0)