In Reply to: MGIIIa tweeter question posted by Davy on August 6, 2014 at 17:03:48:
Hi Davy, I owe you a reply to the PM. Sorry it is taking so long to get to it.
Yes you can take the 1 ohm resistor off - or just bypass it with a favorite wire. You will have higher output from the tweeter but the XO will rise by 1/3 of an octave so that the play level at the lower frequencies that may harm the tweeter would still be approximately at the same level as with the 1 ohm resistor on the tweeter.
That leaves you with the issue of phase and a broader mid-high dip. I don't know how that change would add up but it is really worth trying if you want the extra sparkle of the newer 3.x models.
But be sure your amp can handle the low imp..
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: MGIIIa tweeter question - Satie 21:28:46 08/06/14 (1)
- RE: MGIIIa tweeter question - Davy 15:17:02 08/07/14 (0)