Home Planar Speaker Asylum

Welcome! Need support, you got it. Or share your ideas and experiences.

RE: 3.7 Frequency Response from listening position

"The main resonance of the 3.7 should be around the 60hz area so it is odd that it is where you have a big suckout."

Yes, that blew me away...would not have thought at that frequency...as you have stated...


"I would repeat the measurements for each speaker separately with the meter aimed at the midrange. If they have the sweep with 1/3 octave warble tones it will give you a better feel for the measurements. Your positioning is fine."

Let me see if I understand this...So leave the meter where I showed in the photos, BUT point it towards the midrange of each speaker, run the tests one speaker at a time, then both together??? With the 1/3 octave warble tones...do you have to have weighted warble tones for the RS meter??

I will download the REW software and pick up a mic...but will not have it until they have become the "I" version...I will repeat what I did, just to see if there are any significant changes...from the onset, I did make it clear this was primitive at best...

Thank you for all your help...
Mark






This post is made possible by the generous support of people like you and our sponsors:
  Analog Engineering Associates  


Follow Ups Full Thread
Follow Ups

FAQ

Post a Message!

Forgot Password?
Moniker (Username):
Password (Optional):
  Remember my Moniker & Password  (What's this?)    Eat Me
E-Mail (Optional):
Subject:
Message:   (Posts are subject to Content Rules)
Optional Link URL:
Optional Link Title:
Optional Image URL:
Upload Image:
E-mail Replies:  Automagically notify you when someone responds.