In Reply to: 1.6qr Active Cross Frequency Question posted by kkcinc@verizon.net on February 11, 2012 at 17:05:41:
I have an MT1 crossover board from Linkwitz Labs that is set up to duplicate the stock crossover frequencies. You buy the bare board and have to calculate the component values before you build it. But it is an inexpensive and very transparent crossover, far better than pumping signal through the stock crossovers. Highly recommended!
"Knowing what you don't know is, in a sense, omniscience"
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Another option is Linkwitz Labs - CometCKO 20:45:06 02/22/12 (0)