In Reply to: RE: Lovin my MMG's, except..... posted by tinnitusintx on February 17, 2012 at 21:38:25:
T-TX, here are some pics. They may make more sense if you check the link at the bottom. No rocket science here...fireworks give me a hard enough time.
1. Do note the black tape at the top of the oak stick (1"x2"). It allows the cloth to slide back over the top without snags or tears.
2. In some cases, the original cloth will not be able to fully reach the bottom of the MMGs after the mod. [It suits me well for access to the contacts, which I later cover with another cloth segment. New covers will be ordered later.]
3. These are original-design MMGs. The frame sides on the newer ones are wider, perhaps allowing for a slightly wider stick on each side.
4. When covered back, I also use the original wood trim. I would not advise to leave the edges soft...but you are welcome to experiment.
5. Re-tighten to torque or just check every 6 months during first year.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: pics [Stixbees] - JBen 11:17:56 02/18/12 (0)