In Reply to: Re: Yes, I think that concept's full of holes ... :-)) posted by lne937s on April 26, 2007 at 15:04:14:
for elucidating and illuminating the factors in play, including how the outside surface might be reinforced. Very helpful.I've often wondered how a Maggie would sound if its frame were made of a composite similar to what Mitch Kotter came up for turntables back in the late 70's. Of course it would too heavy to move around, given the size of the panel.
In re-doing my MG-2A some years ago, I decoupled the driver (or at least modified the coupling characteristics) to some extent by applying a thin layer of silicon caulk where the driver joined the mounting panel...with, to my ears, good results.
Thanks again. You've given me some very useful food for thought.
Jim
http://www.geocities.com/jimtranr/index.html
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Thanks... - Jim Treanor 16:00:00 04/26/07 (1)
- Also, take a look at Gilmore - lne937s 16:39:18 04/26/07 (0)