|
K&K Audio / Lundahl Transformers Welcome! Need support, you got it. Or share youe ideas and experiences. |
|
|
|
K&K Audio / Lundahl Transformers Welcome! Need support, you got it. Or share youe ideas and experiences. |
|
In Reply to: RE: Behringer DCX2496 with Lundahl passive output posted by Saturntube on September 11, 2007 at 21:19:51:
A little review of level standards is in order here. When I write "4 to 8 volts", I mean rms voltage not peak-to-peak (pp) voltage. 4 to 8 volts rms is about 11.5 to 23 volts pp. 2.4v pp is about 0.85v rms, so the LL1544A will be easily up to the task down to 20Hz. The LL1690 would also be a good choice, but the LL1674 is a higher ratio transformer that would be useful only if you wanted to step the signal up or down by a largeish factor.
Kevin Carter
K&K Audio
www.kandkaudio.com
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: Behringer DCX2496 with Lundahl passive output - KevinC 04:50:25 09/12/07 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
