|
K&K Audio / Lundahl Transformers Welcome! Need support, you got it. Or share youe ideas and experiences. |
|
|
|
K&K Audio / Lundahl Transformers Welcome! Need support, you got it. Or share youe ideas and experiences. |
|
In Reply to: Re: DAC I/V conversion posted by KevinC on June 26, 2004 at 13:05:20:
Konnichiwa,> I am listening to the prototype of the passive transformer output
> stage (output impedance 2.8K ohms) driven by one of the RAKK DAC
> prototypes followed by a Stevens & Billington TX-102 Mk I TVC,
> which then feeds a fully push-pull transformer-coupled tube
> amplifier with an input impedance of 25K.That will work just dandy. The MK1 (and now again the MKIII) where designed to "tolerate" source impedances up to 10k. I consider a 3k Source impedance to be perfectly germane for the 102 MKI & MKIII and pretty acceptable with the MK II 102.
Sayonara
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: DAC I/V conversion - Kuei Yang Wang 02:57:24 06/27/04 (3)
- Re: DAC I/V conversion - Pooge 10:00:26 06/27/04 (0)
- Re: DAC I/V conversion - Pooge 09:17:47 06/27/04 (1)
- Re: DAC I/V conversion - Kuei Yang Wang 15:45:23 06/27/04 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
