|
K&K Audio / Lundahl Transformers Welcome! Need support, you got it. Or share youe ideas and experiences. |
|
|
|
K&K Audio / Lundahl Transformers Welcome! Need support, you got it. Or share youe ideas and experiences. |
|
In Reply to: Clarifications posted by Dr. Exotica on September 16, 2003 at 07:23:06:
If you can give me a bit more information on the Foreplay and the Darling 1626, I can answer more definitively. I need to know the gain of these pieces.Reducing the value of the FET source resistor from its standard 29 ohms to 10 ohms will do it.
I am afraid that locating the tube off the board is not really the best idea. You could turn the board upside down, mount it under the chassis with the heatsinks facing down and put short jumpers from the tube socket to the board pads. However, with a high gain circuit like a phono preamp, the additional lead length may result in instability.
Why not just light up the tube of your choice on the top of the chassis and conceal the real tube underneath nicely nestled on its board?
Kevin Carter
K&K Audio
www.kandkaudio.com
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: Clarifications - KevinC 08:21:39 09/16/03 (6)
- Sensitivities and gain - Dr. Exotica 11:17:19 09/16/03 (5)
- Re: Sensitivities and gain - KevinC 11:45:56 09/16/03 (4)
- Thanks - could you possibly explain the math? - Dr. Exotica 22:02:25 09/16/03 (3)
- Re: Thanks - could you possibly explain the math? - KevinC 06:41:27 09/17/03 (2)
- Implementation pictures/ideas - Dr. Exotica 12:33:13 09/18/03 (1)
- Re: Implementation pictures/ideas - KevinC 04:51:54 09/19/03 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
