K&K Audio / Lundahl Transformers Welcome! Need support, you got it. Or share youe ideas and experiences. |
|
Hi Kevin,
While reading the specs for your CCS's, the large CCS intended for an external heatsink has a 20W limit, but the general specs mention a limit of 100mA. I also was looking at your blog regarding the KT150 mono power amp project and it looks as though you have a CCS on a heatsink at the rear of the amp and I assume it is for the output stage which would be above 100mA for PP KT-150's.
So finally my question: Do you have a version that can handle 200mA+ up to the 20W limit? Or will I require parallel CCS's? I would like to use it in an output stage where I will have a cathode voltage around 70V and 200mA of cathode current.
Thanks,
John
De gustibus non est disputandum
This post is made possible by the generous support of people like you and our sponsors:
Topic - CCS applications - nerdorama 08:39:07 05/28/16 (9)
- RE: CCS applications - KevinC 12:41:57 05/28/16 (7)
- RE: CCS applications - nerdorama 23:50:27 05/28/16 (6)
- RE: CCS applications - KevinC 07:34:06 05/29/16 (5)
- RE: CCS applications - nerdorama 20:29:36 07/02/16 (1)
- RE: CCS applications - KevinC 19:44:45 07/04/16 (0)
- RE: CCS applications - nerdorama 16:05:25 05/29/16 (2)
- RE: CCS applications - KevinC 16:17:46 05/29/16 (1)
- RE: CCS applications - nerdorama 16:56:34 05/29/16 (0)
- RE: CCS applications - JKT 10:49:31 05/28/16 (0)