10 PP amp

K&K Audio / Lundahl Transformers

Welcome! Need support, you got it. Or share youe ideas and experiences.

Since I have a few sets of 10's (not 801's, but could get those too) I wonder about a PP 10 amp project. The 10 is a little unconventional as it has both high gain and high plate resistance.
The three requirements I have are that the secondary be 16 ohms, that the amp have very good HF bandwidth extension, and that the amp do a harmonically authentic disappearing act. I suppose the amorphous cores are the choice.
I'd like to start planning this amp (or to ditch the 10's and do something else) and I ask for recommendations. Would also appreciate recommendations for a fine diff driver tranny as well. The driver tube types can follow the requirements that transformer presents.

This post is made possible by the generous support of people like you and our sponsors:

Sonic Craft

Topic - 10 PP amp - Jon Lane 10:09:09 05/22/05 (9)

Re: 10 PP amp - Ivan303 20:44:57 05/29/05 (0)

10s are great - Ed Sawyer 20:13:24 05/26/05 (1)

Re: 10s are great - Jon Lane 16:34:27 05/28/05 (0)

Why not consider parallel SE? - Brian C. 13:48:20 05/24/05 (0)

Re: 10 PP amp - KevinC 09:49:00 05/23/05 (4)

Re: 10 PP amp - Jon Lane 19:48:47 05/23/05 (3)

Re: 10 PP amp - KevinC 04:33:47 05/24/05 (2)

Re: 10 PP amp - Jon Lane 13:27:06 05/24/05 (1)

Re: 10 PP amp - KevinC 09:52:44 05/25/05 (0)

You can not post to an archived thread.