Propeller Head Plaza

Technical and scientific discussion of amps, cables and other topics.

Return to Propeller Head Plaza

Message Sort: Post Order or Asylum Reverse Threaded

How to calculate db variation on potentiometer

104.220.29.30
Posted on August 28, 2015 at 08:15:03
DougE
Audiophile

Posts: 273
Joined: March 23, 2001
 My new potentiometer has a measured channel imbalance and I want to see what the db variation will be when its in circuit. If this can't be done when it's not installed, please let me know.

I'm open to help that points me in the right direction and I'll do the math myself.

Thanks,
Doug

 

Hide full thread outline!
    ...
RE: How to calculate db variation on potentiometer, posted on August 29, 2015 at 11:01:52
Tony Lauck
Audiophile

Posts: 13629
Location: Vermont
Joined: November 12, 2007
 Looking at one channel, the potentiometer is a three terminal device, with a signal input, a signal output and a ground. There are, in effect, two variable resistors, R1 and R2, connected in series from the input to ground and the output taken from the connection between R1 and R2. The attenuation (voltage) is given by R2/(R1+R2).

When you connect a load, RL, the load appears in parallel to R2. The effective resistance of R2 is replaced by R3, as given by the formula
1/R3 = 1/R2 + 1/RL, or equivalently R3 = (R2 * RL) / (R2 + RL)
Then the attenuation (voltage) is given by R3/(R1+R3)

There is one more factor to consider. The load placed on the source will be R1 + R3. If the source impedance is R0, then the voltage input to the potentiometer will be reduced in the ratio (R1 + R3) / (R0 + R1 + R3).

The overall effect of these two steps is that the original output voltage will be reduced by the product of the two ratios, i.e.
[ (R1 + R3) / (R0 + R1 + R3) ] * [ R3 / (R1 + R3) ]

Take 20 log(base 10) of this value to get the dB.

You will need to know the source resistance, R0, and the load resistance, RL. Then you can measure the values of R1 and R2 at different settings of the potentiometer, getting the values for both channels.

Tony Lauck

"Diversity is the law of nature; no two entities in this universe are uniform." - P.R. Sarkar

 

RE: How to calculate db variation on potentiometer, posted on September 21, 2015 at 21:38:29
DougE
Audiophile

Posts: 273
Joined: March 23, 2001
 Thank you!

 

Page processed in 0.025 seconds.

[ Top Top of Page ] [ Contact Us ] [ Support/Wish List ] [ Copyright © 2024, Audio Asylum, all rights reserved ]
[ General ] [ Speakers ] [ Tubes ] [ Vinyl ] [ Digital ] [ Hi-Rez ] [ Video Asylum ] [ Cables ] [ Tweaks/DIY ] [ Music ] [ Films ]