K&K Audio / Lundahl Transformers

Welcome! Need support, you got it. Or share you ideas and experiences.

Return to K&K Audio / Lundahl Transformers

LL 9206 Basic Kit Problems

24.116.64.188
Posted on September 30, 2009 at 08:06:01
AudioSoul
Audiophile

Posts: 1492
Location: north central AZ
Joined: July 9, 2005
Contributor
  Since: September 24, 2009

I have already talked with Kevin on this issue. My basic kit is not working properly. It is not giving me the measurements that Kevin gave me so I have to take it apart. OK my question. The transformers are stuck to the double sided tape. Is there a way to take them out without ruining the box or the transformers? I know double sided tape is pretty tough. Thanks, David

RE: LL 9206 Basic Kit Problems, posted on September 30, 2009 at 08:10:57
KevinC
Manufacturer

Posts: 1999
Joined: April 19, 2001
Contributor
  Since: October 7, 2002
 Before you do this, have you inspected the solder joints to the pins and the jumpers under a magnifying glass to make sure you haven't shorted two adjacent connections that shouldn't be shorted together?

Heat the outside of the box where the tape is stuck to the inside with a hair dryer until it is just hot enough to be really uncomfortable to touch. Then pull on the board and it should come off the tape with reasonable pressure.

Kevin Carter
K&K Audio
www.kandkaudio.com

Page processed in 0.014 seconds.

[ Top Top of Page ] [ Contact Us ] [ Support/Wish List ] [ Copyright © 2009, Audio Asylum, all rights reserved ] [ Go Green ] [ Take5 ]
[ General ] [ Speakers ] [ Tubes ] [ Vinyl ] [ Digital ] [ Hi-Rez ] [ Video Asylum ] [ Cables ] [ Tweaks/DIY ] [ Music ] [ Films ]