 
|
Audio Asylum Thread Printer Get a view of an entire thread on one page |
For Sale Ads |
|
|
Audio Asylum Thread Printer Get a view of an entire thread on one page |
For Sale Ads |
66.245.34.182
In Reply to: Picked up my new VPI table...question posted by Eflatminor on October 10, 2006 at 17:04:07:
it's gotta be the arm, because i use the ring with my scoutmaster and a jmw9 signature arm and no problems using the cueing lift. that said, i prefer to lower the arm with my finger as well.you may need to increase the height of the lift to solve the problem. it's easy with the jmw9, but ive never used the graham so somebody else may need to chime in.
Follow Ups:
I have the exact set-up as yours and if you have the washer in there the record will be ramped down causing your arm to jump to the outside exactly as you desribe.
I can't think what you're referring to. Where would I look for it?
There is a small-ish black rubber washer mounted on the spindle, atop the platter. I don't use the outer ring clamp but it sounds like that could be the problem; it could cause the periphery of the LP to be lower than the center. The rubber washer is removable.
This post is made possible by the generous support of people like you and our sponsors:
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2013, Audio Asylum, all rights reserved ]
[ Take5 ]
