|
Audio Asylum Thread Printer Get a view of an entire thread on one page |
For Sale Ads |
73.201.46.192
In Reply to: RE: Should I be concerned here? posted by TMol on May 22, 2016 at 13:33:20
set the anti-skating to 0 balance the arm so it levitates then blow gently at the head shell side ways and up and down. The slightest airflow should be able to move the arm through the entire range of motion of the arm. If it is sticking then you have a bearing problem. On a JVC QL 2 they used fairly good bearings if they are not damaged you should be able to move the arm without any noticeable stiction. If that fails look into getting another arm or have the bearings rebuilt, at that point you might also want to rewire it. Also gently tugging and twisting the arm tube you should not be able to detect any play. If you do the bearings are loose.
dee
;-D
True terror is to wake up one morning and discover that your high school class is running the country.
quote by Kurt Vonnegut
Follow Ups:
When I mounted the cartridge I zero'd out the tracking force, up and down motion seemed good. On lateral movement there is some stiction as the tonearm reaches the end of the record, I assume it's because of the auto return function. I don't detect any play when I lightly twist the arm so I think they were misadjusted at the factory--or exactly the way they should be.
check for play and you should be cool
dee
;-D
True terror is to wake up one morning and discover that your high school class is running the country.
quote by Kurt Vonnegut
Post a Followup:
FAQ |
Post a Message! |
Forgot Password? |
|
||||||||||||||
|
This post is made possible by the generous support of people like you and our sponsors: