|
Audio Asylum Thread Printer Get a view of an entire thread on one page |
For Sale Ads |
108.38.55.213
In Reply to: RE: stylus cleaner posted by hifitommy on February 09, 2016 at 01:35:51
Welllll, I've managed to use almost a WHOLE bottle of LP#9. Amazing how those 7 years flew by. In that time the price has risen to like $30US! I also have become an old fart who says stuff like "I am NOT paying 30 dollahs for 25 cents worth of product in a fancy bottle!"
If you find the Magic Eraser safe and relative convenient, it must be OK. Could I ask you to list the step-by-step on how you use the Eraser?
I am concerned at the possibility of scraping off the diamond from my lovely ADC XLM-II. I've tried that already anyway- a few year ago our housekeeper dusted my turntable including removing the entire cantilever from a Dynavector XX- owch!
T.I.A.
Follow Ups:
I've used the ME for a couple of years with no problems I'm aware of.
1. I cut a cube from the original sheet.
2. Place the cube next to the platter (stationary), not on it.
3. Position stylus directly over the ME.
4. Use arm lift to lower and raise stylus directly into the ME, repeat 4-6 times.
5. Brush off stylus/cantilever to be sure no fibers remain.
I don't do this for every record, but maybe for every other listening session. That is unless it is an extended session of half dozen sides or more. Yesterday when I did this procedure I noticed a small black dot on the ME where the stylus made contact. I've seen that before and assume it is "junk" cleaned from the stylus. When I see that I then move the ME slightly to a clean area before further contact.
Now however reading Dave Pogue's reply makes me wonder, should I follow up the ME with a liquid cleaner to remove disrupted "junk" before heat bakes it on? Maybe not every ME application but at least say once a week?
"You can't know what the "best" is unless you have heard everything, and keep in mind that given individual tastes, there really isn't any such thing." HP
Cut a thin, small square of ME and place it on your platter.
Using the tonearm cue to lower the stylus into the ME and lift it out.
Repeat several times.
Tre'
Have Fun and Enjoy the Music
"Still Working the Problem"
;-)
Definitely do not rub with the magic eraser. That's a sure fire way to snag the cantilever.
Nt
What it appears to do is drive the gunk up onto the stylus. I sent my Soundsmith Zephyr to Peter Ledermann for "evaluation" and he found a lot of it "welded" to the diamond where it attaches to the cantilever. Surprised the heck out of me as I had been using the Magic Eraser in exactly this way and recommended it for a long time. It may work in conjunction with other stylus-cleaning methods but I'm no longer a fan.
Fwiw, Peter recommends building a mound out of Fun-tak/Blu-Tack and dipping the stylus repeatedly into that, while also cleaning the stylus (back to front, of course) with a small brush that's relatively stiff.
..., before I drop the needle onto a record. A blast of air also works to remove any Magic Eraser powder residue.
Post a Followup:
FAQ |
Post a Message! |
Forgot Password? |
|
||||||||||||||
|
This post is made possible by the generous support of people like you and our sponsors: