|
Audio Asylum Thread Printer Get a view of an entire thread on one page |
For Sale Ads |
74.130.29.193
In Reply to: RE: +1 for the Adjust + Software posted by Des on November 30, 2015 at 02:31:42
Here are a few of my previous posts relative to my experience with azimuth. One thing I discovered is that no two test records will provide the same azimuth adjustment results regardless of whether you use crosstalk phase or crosstalk amplitude to adjust azimuth. The bottom line from my experience is that setting the cartridge level with the record playing surface is probably just as good as using a test record to painstakingly adjust azimuth. Of course, as always, YMMV. It's certainly possible your ears are better than mine.
Edits: 11/30/15Follow Ups:
Went back and looked at ALL of these. Some really great stuff here including your HW inquiries. A lot of work too. The part about the different test record results is perplexing.
Many Thanks.
> The part about the different test record results is perplexing.
I think this shows that different cutting lathes have slightly different azimuth. That's why I think it might be just as prudent to set your cartridge level with the playing surface and be done with it. That's what I do, anyway.
Good luck,
John Elison
Post a Followup:
FAQ |
Post a Message! |
Forgot Password? |
|
||||||||||||||
|
This post is made possible by the generous support of people like you and our sponsors: