|
Audio Asylum Thread Printer Get a view of an entire thread on one page |
For Sale Ads |
74.130.29.193
In Reply to: RE: see page 725 posted by ringwear on October 08, 2015 at 01:35:25
This particular edition was printed in 1953. What exactly do you wish to emphasize. I've read pages 725 through 727. They talk about tracking error and distortion for a straight 8-inch tonearm without headshell offset versus one with offset. The straight tonearm should be aligned with underhang to minimize distortion whereas the offset tonearm should be aligned with overhang to minimize distortion. The book says the straight 8-inch tonearm will have about 18.6-degrees tracking error with approximately 6.7-percent distortion. I don't know how they arrived at their figures, but they claim the offset tonearm will produce only 0.76-percent distortion. Is this what you're referring to?My question to Poinzy was "how does his protractor work if it doesn't have an arc for adjusting overhang and an alignment grid for adjusting offset." Here is what Poinzy wrote in one of his posts above:
> When you're done, you don't end up with two "null-point" alignment grids, like you see on most downloadable protractors.
> You get an overhang value and an offset angle for one-point alignment. No wiggling back and forth.Well, there is no wiggling back and forth with an arc protractor. You adjust overhang with the arc and you adjust offset with either one of the two grids. You only have to "wiggle" back-and-forth if you disturb one adjustment while making the other. How does Poinzy go about adjusting overhang and offset? In other words, how does Poinzy's protractor work if it doesn't have an arc and an alignment grid?
On the other hand, if Poinzy is suggesting a straight tonearm without offset in order to simplify the alignment process, that would be both unnecessary and absurd. If you want to simplify the alignment process, you can simply attach the cartridge to the headshell without doing an alignment at all. You will achieve much greater accuracy that way than using a straight tonearm without offset.
Thanks,
John Elison
Edits: 10/08/15 10/08/15 10/08/15Follow Ups:
nothing. just trying to be helpful.
Okay! Thanks! I think I have a fairly good understanding of tonearm alignment geometry and there are more recent papers written on the subject.
Thanks again,
John Elison
you really are a big asset in this little pool we have.
Post a Followup:
FAQ |
Post a Message! |
Forgot Password? |
|
||||||||||||||
|
This post is made possible by the generous support of people like you and our sponsors: