|
Audio Asylum Thread Printer Get a view of an entire thread on one page |
For Sale Ads |
174.16.171.208
In Reply to: RE: Undo rubbing alcohol damage on vinyl? posted by ianm0 on August 14, 2014 at 18:32:12
is it residue or damage from the solvent?
Follow Ups:
I doubt it's due to alcohol. I have used isopropyl without issues.
I've used 99% isopropol alcohol(and rinsed well with steam-distilled water)on over 1200 records without incident.
"When we look into the deepest space with our most powerful telescopes, we see only the past"
However rubbing alcohol often contains perfumants which may leave residue. I always use the 90% pure isopropynol: no additives. try cleaning with as pure alcohol as.you can get. Also some plastic sleeves interact w alcohol so be sure to dry after cleaning
Edits: 08/14/14
I tried 99% isopropyl but did not get rid of the noise completely.
You are spot on about the sleeves. I had a couple of LP's damaged - with surface noise - at the outer grooves due to incomplete drying before returning the lp into the sleeve. It took me a while to figure that out. Always happened with the first side I cleaned and probably due to solution overflowed from the second side that was cleaned. I now always follow up with a final vacuuming of the first side and let the lp dry completely.
Post a Followup:
FAQ |
Post a Message! |
Forgot Password? |
|
||||||||||||||
|
This post is made possible by the generous support of people like you and our sponsors: