|
Audio Asylum Thread Printer Get a view of an entire thread on one page |
For Sale Ads |
98.23.19.239
In Reply to: RE: Akai AA-R22/L Receiver question posted by Nadguy on July 29, 2014 at 11:42:47
I don't see a disparity. The phono stage is a separate amplifier from the line-level section. The minus 3-dB points of the line-level preamp, known as bandwidth, are 5-Hz and 80-kHz. The phono stage section follows the RIAA equalization curve to an accuracy of ±0.5-dB in-between 30-Hz and 15-kHz. The RIAA equalization curve is like a tone control that boosts bass and cuts treble. I see nothing wrong at all with the specifications you quoted. Of course, some phono stages have better RIAA accuracy.
Follow Ups:
John: Thanks for your input. It's the top frequency of 15,000 kHz on the PHONO stage that confuses me. I would have expected at least 20,000 kHz or am I just wrong about this interpretation? I realize this is not a state of the art receiver.
I doubt it stops reproducing at 15-kHz. Its accuracy is simply not guaranteed to ±0.5-dB past 15-kHz. Perhaps it wasn't the most expensive high-end receiver in its day -- I don't know. I own a cheap Audio Technica AT-PEQ3 phono preamplifier that I paid $45 for brand new and its frequency response goes out to 70-kHz or beyond. Anyway, I don't think you have a problem.
Best regards,
John Elison
Post a Followup:
FAQ |
Post a Message! |
Forgot Password? |
|
||||||||||||||
|
This post is made possible by the generous support of people like you and our sponsors: