|
Audio Asylum Thread Printer Get a view of an entire thread on one page |
For Sale Ads |
38.118.25.194
In Reply to: RE: Dynaco A-25 Amp Considerations posted by SteveBrown on February 10, 2016 at 07:53:04
Hi Steve,
I have been reading about updates of the Mullard 5-20 the ru the EF86 in triode. Claus Byrith has a very interesting paper on the Lundahl.se site (see link). KT-88's would be just the thing to drive my Spendor BC-1's. Where did you get the schematic for your amp?
Dave
Follow Ups:
If you go to about page 87 you'll see a schematic for Rev 8, which (IIRC) what I built (12AT7 driving the KT88's). There are over 1000 posts here, the project was well developed and collaborated on.
Steve and I both built them (I couldn't have done it w/o him) and they've kicked everything else to the curb. Mne are prettier than his ;-}
We built Rev 8 (IIRC) and it used a 12AT7 instead of the ECC88. Also, as has been mentioned, no feedback and EF86 in triode.
Says revision 8 on the bottom...I thought the 12AT7 was substituted from some posts, not on the schematic.
Post a Followup:
FAQ |
Post a Message! |
Forgot Password? |
|
||||||||||||||
|
This post is made possible by the generous support of people like you and our sponsors: