|
Audio Asylum Thread Printer Get a view of an entire thread on one page |
For Sale Ads |
184.8.233.214
In Reply to: RE: Fisher KX-200 posted by Eli Duttman on July 01, 2015 at 10:39:07
good tips, but I just tried to change the input select for the first time and its frozen. Overnite lube didn't really help either. Never seen one that didn't loosen up w/lube.
E
T
Follow Ups:
Keep trying. Maybe a vibrating action on the shaft will help.If it can't be salvaged, just under $5 buys a Lorlin brand replacement from Mouser. :> ) As I previously stated, hard wire 1 set of I/Ps to the phono preamp and the O/P of the phono section, along with all other I/Ps, to the new source selector.
A link is provided below.
Eli D.
Edits: 07/04/15
Taking the knob off and shooting in from the front helped but it is still slow and gummy feeling although I see nothing foreign etc. that might slow it down. At first it was so hard I grabbed the shaft with pliers to turn it fearing I would break the plastic knob it took so much force to turn. Now the knob turns it "OK" but nothing like the other two switches.
Thanks for all your replies
E
T
"Shoot" it some more and keep working it.
Eli D.
Yes,that's the plan. I have a 1927 Crosley radio and I need to relube the tuning knob gear every 6 months. My neighbor that works on guns has a great lube concoction I use. Cheers!
E
T
Post a Followup:
FAQ |
Post a Message! |
Forgot Password? |
|
||||||||||||||
|
This post is made possible by the generous support of people like you and our sponsors: