|
Audio Asylum Thread Printer Get a view of an entire thread on one page |
For Sale Ads |
97.84.205.208
In Reply to: RE: Scott 130 question posted by David Smith on November 17, 2014 at 05:40:22
Are V3A and V103A not just for the rumble filter and loudness?
No,that is another gain stage for which the volume control hooks into and rumble filter you can shut off..Just cap couple off V3a and V1013a with a .1uf to the output jack and that way you will eliminate the controls and that last stage.Be sure to pull the plate resistor off the last stage so it's inactive and just bypass the way I told you.
"
Follow Ups:
Cool, thanks, I'll try that.
Dave
to go thru and I can try them..
"
Seems it was a bit of dirt in the aux level pot. I had cleaned them before but I guess just tons of cleaning for all of those pots?
The tape outs sound clean but the pre outs are fuller, and do sound damned good. I'd be curious if you had a chance to check the tape outs what you thought.
Dave
Dave
The tape outs are ok and I have tried them but there seems to be a bit more gain and I prefer the preamp outs.Shoot me an email when you get a chance.
"
Post a Followup:
FAQ |
Post a Message! |
Forgot Password? |
|
||||||||||||||
|
This post is made possible by the generous support of people like you and our sponsors: