|
Audio Asylum Thread Printer Get a view of an entire thread on one page |
For Sale Ads |
74.47.240.248
In Reply to: RE: Realistic STA-2000 question posted by JonM on September 04, 2014 at 03:27:36
Thanks Jon. There was voltage there but it doesn't move. I took the cover off and manually closed it and it blew its main power fuse. Something amiss in the L channel.
ET
Follow Ups:
So the proection circuit driving the relay detected high amounts of DC and did it's job - that's good!
I'm assuming the relay simply disconnects the speakers in the face of DC at the output. Did you have a load attached when you closed the relay? If you didn't, I'm trying to figure out how closing the relay would give a path to ground (and draw enough current to blow the power fuse). If you did have a load attached, I hope you didn't take out a woofer in the process.
Charles may be right - look at the output transistors, and keep an eye out for anything earlier in the signal path that might have caused an output transistor failure. Without a schematic or the amp itself to look at, it's hard to give much more guidance.
Good luck, and let us know how you make out.
You can try removing the power to one board at a time an see if the relay engages. That will at least tell you which board, and maybe even what channel.
My money is on the output transistors on the driver board.
post your findings.
charles
Post a Followup:
FAQ |
Post a Message! |
Forgot Password? |
|
||||||||||||||
|
This post is made possible by the generous support of people like you and our sponsors: