|
Audio Asylum Thread Printer Get a view of an entire thread on one page |
For Sale Ads |
68.118.44.2
In Reply to: RE: Partially dissenting opinion! posted by Eli Duttman on July 27, 2014 at 10:35:06
Eli, I agree as a rule of thumb. But I think there are other factors at work as well. Type of music and how loud you listen can come into play. Here's my experience. Don re-worked my S5000. Among other things he set things up so my output tubes are running quite soft, putting out about 12 watts a channel (if Don sees this maybe he'll chime in and give a few more details). Get this. I'm using this amp to drive a pair of Magnepan MMG's. Granted they won't play super loud but up to about 85db they sound glorious, in a fairly large room of about 16'x20'. Another factor is that my listening chair is only about 8' away from the speakers. Sonicly the synergy is great. Electricly it shouldn't work all that well, but it does. Of course, YMMV.
PaulB
Follow Ups:
I've been using a pair of DIY Zaph Audio SR-71's with GREAT success. It even has a third speaker output that I use for my subwoofer.
The SR71's go cleanly down to around 40-45Hz and the sub just "fills in" the rest.
charles
If you don't push the volume level, it should sound very good. While inefficient, "Maggies" present a tube amp friendly "flat" impedance curve.
Connect a H/K Cit. 2 refurbished ala Jim McShane to the MMGs and you'll get both finesse and volume. :> D A properly reworked "Deuce" produces dynamic power peaks in excess of 120 WPC. Continuous power is "only" 60+ WPC.
Eli D.
Post a Followup:
FAQ |
Post a Message! |
Forgot Password? |
|
||||||||||||||
|
This post is made possible by the generous support of people like you and our sponsors: