|
Audio Asylum Thread Printer Get a view of an entire thread on one page |
For Sale Ads |
71.241.199.142
In Reply to: RE: BIC 960 Turntable posted by 960 manual on January 19, 2012 at 14:51:33
Doug is right. If your BIC sets the arm on the record and then shuts off after the last playing you must comepletely disasemble and clean and lubricate the post with the levers and red plastic sensor plate. Reassemble and you will have cured the problem. Dennis
Follow Ups:
Can you tell me how to completely disassemble the BIC SP-65, Series Z, Serial number 551963-673-4979 which I assume is basically the same as the 960 in that regard. I need to get in there to fix a problem of the arm setting down at 7" rather than 12". I just don't know what to do to get into that area.
Thanks.
Harris
You all seem so knowledgable maybe you can help me.
I have a BIC SP-65, Series Z, Serial number 551963-673-4979 changer. I removed the snap ring from the center of the turntable but I can't pull it off no matter how hard I try! I sprayed some WD 40 in the area but no help! Am I missing something or is there another way to get into the guts of the machine so I can free everything up, possibly change the belt, etc.
Thanks,
Harris
Post a Followup:
FAQ |
Post a Message! |
Forgot Password? |
|
||||||||||||||
|
This post is made possible by the generous support of people like you and our sponsors: