|
Audio Asylum Thread Printer Get a view of an entire thread on one page |
For Sale Ads |
181.115.140.68
Hi folks, I need to get 10 of these for my new Furman Power regenerator.
Anybody now of an online store in the continental US where I can find. I don't want to order from CHina.
Follow Ups:
Big difference between a conditioner and a regenerator.
A regenerator is really a heavy duty amplifier, designed to output 60Hz.
The cost of running one is higher, since you are basically running an amplifier to power all your other stuff. I own a regenerator also. A PS Audio P600 (I use it for just my digital stuff)
A conditioner does not regenerate the AC power. It cleans the power up.
A conditioner often has a transformer and maybe some other types of filters in it.
The transformer is the main filtering agent in the Furman. Most of the weight in it is just the huge toriodal transformer. (My Furman also has a huge automotive style stiffening capacitor in it. A capacitor used this way keeps the voltage from sagging if a big current drain hits it))
(PS if you get buyers remorse, pm me and I will buy your new to you Furman off you, depending how far it is to ship! From San Diego, Hawaii or Alaska... ahhhh ??? I am in SE Wisconsin BTW. LOL)
Anyway, also, you might (in the future, like a year from now..) see if you can just buy the rear panel with US duplex openings which will fit your IEC backed Furman.
Swapping out the parts is mostly a mechanical bit of work. (no soldering)
And it would let you fill in the US duplex holes with the ones of your choice.
I just looked at my Furman and the back panel is a bolt on separate, and I bet most of the Furman top of the line are the same size box, with various bits installed. Anyway just a thought if you ever want to convert the back of it.
Good luck.
PS I do not think using the adaptors you need will hurt the performance enough to worry about it...
Good Morning, Rique:
From Take five Audio in Mt. Forest, Ontario.
Sincerely,
Kingsley.
I just found the answer and thought it might help someone else at some point. This is a US based store.
http://www.cordtec.com/list.asp?classid=69
Trying to understand why. All the Furman's I've seen have have five nice outlets so I understand the math of why you would then need ten of the adapters. What do you need them for? Believe me adding two more connection points especially with cheap adapters is a bad idea.
ET
"If at first you don't succeed, keep on sucking till you do suck seed" - Curly Howard 1936
I agree, Awe-d-o-file. That type of adapter tends to only be used for power cord and AC outlet burn-in purposes. An adapter like that may terribly degrade audio performance. Basically a wad of PVC dielectric, and unknown-quality brass contacts in the way of the AC outlet and AC plug contacts rather than a more direct path. Just my 2 prongs worth.
All my power cords are are hubble type while the sockets on the Furman are IEC. Thus...
If it was mine Id replace whats on the chassis with outlets regadless of warranty implications. Im sorry, I know that doesn't help
ET
"If at first you don't succeed, keep on sucking till you do suck seed" - Curly Howard 1936
I agree with Jea48.It is truly odd that they used female IECs for the outlets.
If it were mine I would swap out the IECs for standard outlets.
.
Freak out...Far out...In out....
swapping out the plug seems easier said than done. The whole rear plate would need to go. Properly seated adapters with contact electrical paste should not degrade electrical contact at all.
Properly seated adapters with contact electrical paste should not degrade electrical contact at all.
You best do your homework if you decide to use contact paste on the male and female IEC connector contacts. Short term it may be fine. I would suggest you look at the long term effects of using contact paste.
Contact paste works good where the connection is made air tight by use of a pressure connector. Example would be that of a hi-press or lessor crimp type connector. Even a terminal screw or terminal screw/ plate connector.
I personally would not use contact paste on the male blade and female contacts of a 120V connection. For one thing, especially on IEC connectors, it will work as a lubricant.....
Edits: 01/24/17
I did and I use a product called solid gold. Its a conductive oil that stands well the pass of time. Specially made for audiophile applications.
Why would a manufacture build a power conditioner with IEC female receptacles? Who builds power cords with a male plug IEC connector?
A standard NEMA receptacle and matching plug connection beats a combo IEC connection hands down. Contact surface area, contact pressure, and under load conductivity.Was it built for use in the USA?
Are the balanced power receptacles GFCI,(Ground Fault Circuit Interrupter), protected? IF not be very careful using it....
Edits: 01/23/17
Likely the A/V pro's trying to keep normal people like us out. Or is it the other way around?
Cheers!
Jonesy
"I know just enough to get into trouble. But not enough to get out of it."
Same company sells them for less than half the price through Amazon. Note that the price shown is for a 5 pack. Just FYI.
Post a Followup:
FAQ |
Post a Message! |
Forgot Password? |
|
||||||||||||||
|
This post is made possible by the generous support of people like you and our sponsors: