|
Audio Asylum Thread Printer Get a view of an entire thread on one page |
For Sale Ads |
68.8.172.230
In Reply to: RE: Enacom posted by Awe-d-o-file on July 30, 2016 at 11:17:29
Gonna do some for my system.
I know in the back of the Phase Linear PL400 there is a RC network that is very close in values to what has been recommended here. I know it's a Zobel but the values if I'm correct are either .1/.01uf with a 8ohm resistor on the speaker binding post. I have to double check. It's uses a Quasi-Complementary NPN output stage.
So I will do the one DIY version on your site with bare wire ends. :)
Follow Ups:
Not sure, but that network is probably there to keep the Phase Linear stable at very high frequencies and/or to protect the driven speaker from the oscillation of a Phase Linear if it goes unstable, which was known to happen if the load capacitance got to be too much for the amplifier.
Yo Cougar, I expect a full report!
LOL!
two 10 ohm (5 ohms) 1 watt resisters in Parallel and with a .1uf caps. So it's not as close in values as I thought. My Bad! :)
Hopefully this works out like everyone here who has made theirs.
What should expect or not expect to hear when I first connect them? more quiet background, depth or wider soundstage?
Post a Followup:
FAQ |
Post a Message! |
Forgot Password? |
|
||||||||||||||
|
This post is made possible by the generous support of people like you and our sponsors: