|
Audio Asylum Thread Printer Get a view of an entire thread on one page |
For Sale Ads |
205.175.226.97
In Reply to: RE: matching driver watts posted by SOUNDY on June 01, 2016 at 14:49:32
Probably, but I would try it at 400hz, and use a notch filter on its resonance peak.I used a 94dB woofer section (dual 8's) with a 97dB full-range (attenuated 3dB in the network).
Edits: 06/01/16Follow Ups:
i think thats what i'do seeing the choice of small fullrange drivers around.
would i be able to get away with not having a notch filter if the resonance is much lower than the xover point of 400hz ? at 400hz there doesn't seem to be any output near the resonance point but im new to this so cant be sure.
"would i be able to get away with not having a notch filter if the resonance is much lower than the xover point of 400hz ? "
No.
It will work fine without the notch filter, it will just have a big peak at its resonant frequency.
What kind of drivers are you considering?
hi hope your still there,
i havent got my email alerts activted so i didnt see your reply.these are the woofers ive been looking at, sealed of course. i have seen a few fullrange drivers but only one is sensitive enough.
also this woofer too
Post a Followup:
FAQ |
Post a Message! |
Forgot Password? |
|
||||||||||||||
|
This post is made possible by the generous support of people like you and our sponsors: