|
Audio Asylum Thread Printer Get a view of an entire thread on one page |
For Sale Ads |
68.8.142.60
In Reply to: RE: You need to try some different types of diodes that you have... posted by Tweaker456 on March 16, 2016 at 01:14:36
O-scope and even hear a difference in less brightness and harshness with more information detail. The noise will be present in ringing and you can actually see this with scope. Like I have said, Only you can determine which will sound best to your ears. I have tried the Cree and in some gear I didn't like it and in others it sounds good.Don't get hung up on specs and go with your ears. Like Tubes, their specs are not great but tubes sound wonderful. One of the best speced and lowest distortion preamps (I will not say who designed it) but was the worst sounding preamp I have ever heard to my ears. So it all comes down to what we like and what works in our system.
Bigger parts or larger values don't always equate to better sound. Also if the other components in the circuit/s after the PS are adding noise or harshness to the sound, all that hard work will be for not!
Give the Diodes you like a try and let them break in for at least 100-150 hrs. before making a final judgement on them. Some diodes change in sound (can be dull sounding at first) and after a while they will open up and sound nice.
Edits: 03/16/16Follow Ups:
Do you see more noise on a scope with the same diode model with a higher v or a rating. That is the question. Also thanks for the heads up on the break in thing. Good reminder. Tweaker
It's good practice to use diodes that are rated for ~3X or at most ~4X the voltage put out from the transformer, if using half-wave rectification. The voltage seen by the diode will be 1.414 times the max AC voltage seen at the transformer secondary with no load. (V is higher with no load.) In full-wave rectification, two diodes are in series, so it is very safe then to use diodes rated for only 2X the expected voltage from the transformer. My point earlier was more about current rating than about voltage rating. For this application, 100V or 120V diodes (no matter what type you choose) should be very safe.
you just need to do the experiment with the parts and scope. It may be very slight difference and one you may not even be able to hear. So don't stress on specs. If you can't measure it then just go with what sounds best to your ears! it's really not that big of a deal if the specs are slightly better or worse! Why worry about it? Pick one that was suggested and go with it.
Bigger or higher V rating doesn't always mean better, it will handle better and last longer due to a safe operation range. You need to get that thought out of your head, just because it may have been the case with some parts doesn't mean that's the golden rule! UF types sound like a good deal and you should try those.
Post a Followup:
FAQ |
Post a Message! |
Forgot Password? |
|
||||||||||||||
|
This post is made possible by the generous support of people like you and our sponsors: