|
Audio Asylum Thread Printer Get a view of an entire thread on one page |
For Sale Ads |
66.91.231.107
anybody use Furutech FP-901 R?
Follow Ups:
I just received a pair of FP-901 G's from Sonic Craft. Really nice! Lower mass than the WBT 201's similar to the WBT 210's but more structurally sound. I'm removing a pair of WBT 201's and installing these but can't do a proper comparison as I'm also changing my input wiring. The reason for the change is the 201's attach from the inside with only a knurled ring to counterhold outside. The 910's attach from the outside via a normal hexnut with a knurled shank attached.
wood1,
Please post your review of the Furutech FP-901G.
dhl labs are the best sounding I have tried,hiest pure copper on the market.Why use outstanding occ wire and attach it to a average sounding connector.By the way before you solder in your wire to the connector insert the male connector on the outside and put your wire all the way in until it touches the male pin connector ,then solder the wire to the female inside the chassis.This is the best sounding way of installing a wire I have ever tried.
are they the best, I don't know but WBT low mass type RCA connector, speaker binding post are my first choice.
you're going to get a wide variety of responses to these two posts. It's unlikely of the many many (hundreds?) out there most have tried more than a couple. Good luck! Do check Sonicrafts sale, they have some good deals. See link. They have Cardas, Eichmann, Vampire and Furutech on sale.
E
T
Post a Followup:
FAQ |
Post a Message! |
Forgot Password? |
|
||||||||||||||
|
This post is made possible by the generous support of people like you and our sponsors: